M2_shootr Posted January 4, 2018 Posted January 4, 2018 The link is #43. The bolt carrier is #29. The link is attached to the carrier with a pin. Some of the “peening” below the cup is rather indicative of dimples caused by jamming the bolt carrier into position without guiding the link into the cup. These marks are rather common and usually owner created upon assembly. Quote
Jolly Roger Posted January 4, 2018 Posted January 4, 2018 (edited) But that doesn't account for the drag marks all the way up the arm..or are they drag marks at all? so hard to tell by pictures alone. But I see and understand what your saying M2. The link is #43. The bolt carrier is #29. The link is attached to the carrier with a pin. Some of the “peening” below the cup is rather indicative of dimples caused by jamming the bolt carrier into position without guiding the link into the cup. These marks are rather common and usually owner created upon assembly. Edited January 4, 2018 by Jolly Roger Quote
M2_shootr Posted January 4, 2018 Posted January 4, 2018 Not a drag mark. The link is induction welded, the copperish discoloration is excess flux from the welding process Quote
Jolly Roger Posted January 4, 2018 Posted January 4, 2018 I had no idea they were welded, I thought they were just pined. I took a few pictures of mine and by looking at them it appears that maybe his recoil tube may not be screwed all the way in? What do you think? Quote
M2_shootr Posted January 4, 2018 Posted January 4, 2018 Just going off what I was told from a Benelli guy. While I haven’t seen copperish colored flux, I have seen silver solder looking like that Quote
M2_shootr Posted January 4, 2018 Posted January 4, 2018 No idea about the tube......I would take the stock off and check Quote
Drinktothat421 Posted January 4, 2018 Posted January 4, 2018 Why not take it back to where you got it? Was it new?it under warranty. It should be perfect. An 870 has a better finish the. That. Quote
HMLA-167 Warrior Posted January 4, 2018 Posted January 4, 2018 Any weapon should be well cleaned and lubricated when you first get it. Usually the factory puts more of a preservative type of oil on them for long term storage. Maybe factories should all just use Cosmoline. Then everyone would HAVE to clean their weapons before firing them. They would also get to know every nook and cranny of their weapons thoroughly while in that cleaning process. Oh, wait... I'm sure there would be a number of people who still wouldn't clean it first. Never mind. 1 Quote
M2_shootr Posted January 4, 2018 Posted January 4, 2018 Maybe factories should all just use Cosmoline. Then everyone would HAVE to clean their weapons before firing them. They would also get to know every nook and cranny of their weapons thoroughly while in that cleaning process. Oh, wait... I'm sure there would be a number of people who still wouldn't clean it first. Never mind. For me, the initial cleaning and inspection of a new platform is almost more fun than shooting it. 1 Quote
Jolly Roger Posted January 4, 2018 Posted January 4, 2018 Yeah buddy, +1 on that! For me, the initial cleaning and inspection of a new platform is almost more fun than shooting it. Quote
AVATactical.com Posted January 4, 2018 Posted January 4, 2018 For me, the initial cleaning and inspection of a new platform is almost more fun than shooting it. I am getting a vibe here. Do you wear anything.... special... when doing so? Quote
Jolly Roger Posted January 4, 2018 Posted January 4, 2018 ......becoming "one" with the gun.....means sharing the Frog lube... Quote
M2_shootr Posted January 4, 2018 Posted January 4, 2018 I am getting a vibe here. Do you wear anything.... special... when doing so? Holy crap.......now that’s funny. I’m not quite that bad.......yet. Quote
Unobtanium Posted January 4, 2018 Posted January 4, 2018 ......becoming "one" with the gun.....means sharing the Frog lube... I really dislike how peppermint oil feels on my nipples. Ymmv Quote
Unobtanium Posted January 4, 2018 Posted January 4, 2018 I am getting a vibe here. Do you wear anything.... special... when doing so? *I put on my robe and wizard hat.* (Only 80s kids...) Quote
Drinktothat421 Posted January 5, 2018 Posted January 5, 2018 Exteremly dissapointed with the Erection errr i mean direction if this tread. Quote
M2_shootr Posted January 5, 2018 Posted January 5, 2018 Damn........this took a **** of a turn. Quote
Jolly Roger Posted January 5, 2018 Posted January 5, 2018 I feel sorry for the OP, looks like his shaft thingy is hitting the rim of his hole.... Quote
USMC249 Posted July 11, 2020 Posted July 11, 2020 Man this thread took a huge left turn the last few post (Jolly Roger)But it made me ? I also enjoy the time spent diss/ass/lube a new gun. Quote
MNtadpole Posted July 11, 2020 Posted July 11, 2020 @USMC249 more like a huge jump back from the past. LOL this thread is over two years old on the last comment! ? Quote
USMC249 Posted July 11, 2020 Posted July 11, 2020 8 hours ago, MNtadpole said: @USMC249 more like a huge jump back from the past. LOL this thread is over two years old on the last comment! ? Glad I could refresh everyone’s memory. Hope they figured out his M4 by now. Quote
ClackClackBAM Posted July 11, 2020 Posted July 11, 2020 Well.. that was certainly an interesting read... lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.