benelliwerkes Posted April 10, 2013 Posted April 10, 2013 (edited) As for the magazine cap detent removal looks pretty easy.......re-installation is probably a 5 second factory step...with the correct tools and parts. The assembly appears to be housed in a malleable sleeve, which is swaged into the cylindrical hole in the barrel ring; after removal, one could probably fabricate a aluminum / brass / steel tubed sleeve to fit over the assembly and tap in back in place.......the proverbial easier said than done ! Edited April 10, 2013 by benelliwerkes Quote
benelliwerkes Posted April 10, 2013 Posted April 10, 2013 A final thought on punch fabrications........the utility of the punches are easily enhanced by fabricating screwdriver handles to accept the punches. Quote
StrangerDanger Posted April 10, 2013 Author Posted April 10, 2013 Thanks for taking the time to put these together. My M4's barrel is gone at the moment, so I can't inspect mine. Looking at some blown up parts diagrams, and this Brownells image for this particular detent, it is hard to determine if that is in fact a sleeve or if they've just swagged the metal around the hole. If it is a sleeve, it isn't a part that is sourced. Quote
Tango two Posted April 11, 2013 Posted April 11, 2013 Many thanks BW and SD for all your great contributions. Ditto that. They could (hopefully) write the BENELLI M4 how-to-do-it-yourself manual. I'd buy it. It would be easier than searching for it here. Quote
paladinjme Posted April 11, 2013 Posted April 11, 2013 Ditto that. They could (hopefully) write the BENELLI M4 how-to-do-it-yourself manual. I'd buy it. It would be easier than searching for it here. PM Benelliwerkes about his 'Anatomy' manual, I'm not sure if he still sells it, but it is an excellent resource and the source of of many of the pics and info he posts. Quote
StrangerDanger Posted April 11, 2013 Author Posted April 11, 2013 Yep, PM Benelliwerkes. He posts many of his pages from his manuals here. Quote
Reggie_375RGR Posted April 13, 2013 Posted April 13, 2013 I thought that was part of the stuff you were sending to WMD to get NiB? Did you get those gas pistons and cylinders coated? I have been wanting to myself because they get dirty as **** but I didn't know if that was possible to get them coated Quote
StrangerDanger Posted April 14, 2013 Author Posted April 14, 2013 I'm having the pistons done. I didn't know I could take the ARGO plugs apart at the time or I would have sent them as well. Quote
Dave Wright Posted April 15, 2013 Posted April 15, 2013 Has anyone had a problem getting the gas plugs off the first time. My M4 is brand new and the plugs will not turn...yes i turned to the right Quote
StrangerDanger Posted April 15, 2013 Author Posted April 15, 2013 They can be tight. Leverage is your friend. Use a longer tool. Quote
Sukhoi_fan Posted April 15, 2013 Posted April 15, 2013 yes i turned to the right righty tighty, lefty loosie Quote
benelliwerkes Posted April 26, 2013 Posted April 26, 2013 (edited) Here are the dimensions for the M4 magazine cap retainer pin (plunger) and spring. Edited April 26, 2013 by benelliwerkes Quote
StrangerDanger Posted April 27, 2013 Author Posted April 27, 2013 Good info. I assume you removed it? Did you reinstall it? What did you use to swag the material? Quote
benelliwerkes Posted May 23, 2013 Posted May 23, 2013 Another way to simply disassemble / assembly the M4 Gas Plug components. If you don't have a vise, a sturdy C-clamp would work as well. Photos by permission, Benelli M4 Anatomy Series Manual. Quote
benelliwerkes Posted May 23, 2013 Posted May 23, 2013 Nice info. Do you make these manuals? YES. IF you would like more information on the Anatomy Series of Manuals send me a PM. Quote
Scout_21 Posted May 23, 2013 Posted May 23, 2013 YES. IF you would like more information on the Anatomy Series of Manuals send me a PM. I've tried to pm you...and it might have gone through but I don't have a message in my pm outbox. Anyway, I'm interested as well. Cheers! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.