Drundel

ditto to what benddg said.

mainly the oz of shot. I've tried my SBE with surecycle with 1400 FPS 7/8 loads and nada. But it does cycle 1oz. 1250 FPS loads.

Ok, try this, shoot it, and don't try to pump it right after, count to 5 or so and then try it. Or have someone else try the gun. Hopefully its not the gun.

Sounds like after you shoot the action binds up. Interesting, same problem with 3" and 3.5" shells? Might need to see a gun smith or break it down and look for burs or other problems. Mine doesn't do that.

Describe the problem? How does it hang? I've shot many many through mine with no problem.

Wish I could help you, but I've never shot either.

Rem-oil is crap. Many many people have reported problems with it and their SBEs. Break the gun down, clean it VERY good and then use some oil like FP-10 or Miltec-1. A lot of people have been reported good results with it.

I ordered mine in april and got it in june.

http://www.surecycle.com/default.asp?CP=2 Look for the instruction links.

thoe are the same chokes i got.

M2. The Sport II (out last year) uses a crio choke but it is longer than ours in the SBEII. The SuperSport PROBABLY uses the same as the Sport II. [ 08-18-2004, 03:09 PM: Message edited by: Drundel ]

my mistake. [ 08-18-2004, 07:28 AM: Message edited by: Drundel ]

There is only one SBEII, it will shoot 2-3/4 ammo, 3" ammo and 3.5" ammo.

I like the Claw, but it doesn't fit on my SBE, but it does on the SBE2!

It is the clearcoat on the camo. Not sure what to do about it, hopefully someone from Benelli will respond.

a duck hunting forum

the same no-tox as on the fuge?

roster: NP. Glad it worked for you.

coltchris: Wrong address buddy, it should have gone to Accokeek which is where mont is at and he alone is doing all the work. But looks like he is gonna pick up any sent to the wrong address and take care of them. Trust me, its worth the wait.

threeshot: No clue, I've shot a case or two through mine and not test it out with the 7/8 loads. I'll post up when I do how it works, but I could guess about 100-200 rounds of heavy loads should break it in.

most SBE have a problem with that, I just got a cleaning patch and put it on the part where it meets the barrel, problem solved.

JAF: Only problem with my SBEII is the safety. That was fixed for free and took less than a week.

surecycle.com but before I did that I would clean it VERY well and use good oil on it, fp-1o or miltec and see if that works. 7/8 is about as low as you can shoot in it. a lot of people can only shoot those after shooting a lot of heavy 3" loads through it.

Derek Edmonson in KY ETI(Edmonson Technology Inc) Edmonson Technologies 5984 Canton Road, Cadiz, KY 42211 (270) 924-3036 He is one of the best, duracoat is alsy very well. I had my SBE1 tricked out and dipped last year, $150. My SBE and SBEII http://www.drundel.com/sdh/temp/sbes/

i usually wipe mine off with a **** towel. haven't had it hunting yet so time will tell.