crofton

You have pictures?

Thanks, pointing towards the front seems the logical way

TM 10698a-10/1 states the following for the insertion of the cam pin: Insert the cam pin into the bolt assembly through the hole in the bold head so that the hole through the cam pin and index line on the top side of the pin run parallel with the bolt carrier. my question: does it matter if the "index line" is pointing to the rear or front of the bolt group. Seems to install correctly either way, just asking is there a correct way? TIA

Are we talking about the Picatinny Rail, if so Kip has been out of stock for over a month.

I use a snap ring, but the 'grunt' does the following reference step 7.C: http://

TM 10698A-10/1 page 31: http://

Don't know if damaged by snap ring pliers or when pressure applied to reinstall. Since I only pulled the pin just enough to install the new hammer, I have no idea when it occurred and yes it is the side that the snap ring installs on.

Following the insertion of the USA M4 Hammer and when pushing on the "Trigger Pin Bushing", felt a little tension. Therefore I jiggled the hammer and applied pressure. With the applied pressure, the pin popped in. Felt great, then noticed one side was a pancake. There is no way the pressure I applied with my thumb could have caused that (at least my personal opinion) Pancake side http:// Good side: http:// Oh well part on order from Brownells.

Thought the Urbino has a good rep on this forum?

Solution, at least it worked for me. Inserted one tip of the needle nose pliers into the non funneled end of the tool. Covered the fingers with the tool (it does fit) and pushed the Hi-Viz flush with the follower. Using a punch, pushed the Hi-Viz out of the follower. http:// And here it is: http://

Borrowed my neighbors heating iron and in 5 minutes factory magazine tube removed. Installed carriercomp Fl and now attempting to remove the Hi-Viz with the complimentary tool provided. Noting the following two pictures: 1. the funneled end is too small for the fingers of the Hi-Viz. 2. the tool also is shorter than the factory follower. How does one use the cylindrical tool? http:// http:// Edit: Guess this is the solution, in any event it worked. Just found out that only two images are allowed. :-( Check the following post.

Why ruin a perfectly balanced spring for using cheaper blasting ammo.

Believe I would have used the original spring for the larger rounds and KIP's for all the other rounds.

Great info! Food for thought: how about a 'youtube' video of you covering those points and the acronyms.

Here they come! "As you know, the President directed the Attorney General to form working groups with key stakeholders to identify common-sense measures that would improve Americans' safety and security while fully respecting Second Amendment rights," White House Press Secretary Jay Carney said Thursday. http://politics.blogs.foxnews.com/2011/07/07/six-months-after-tucson-shooting-white-house-readies-gun-control-stance

Bud's has them for $1488 (check price, add 3% for credit card) that includes shipping.

Food for Thought! Change your profile to receive private messages. OUT

Well it is now July 2011 and still no barrel

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=239013368

I was the OP and it went way off the reservation, in any event google buds guns shop hacked

My son-in-law has a Vinci that he wants to purchase a rifled and or slug barrel. Searching the Benelli site, no hits (at least we didn't locate any) for the Vincii. If not available, is the stock barrel capable of also shooting slugs and or sabots? http://www.benelliusa.com/parts_and_accessories/barrels.php

1st of all, I believe this is a bogus question and u are friggin with us! With that in mind, you are talking about a sawed-off shotgun (or short-barreled) of course they are subjected to numerous legal issues. Assume you are planning on wearing a black Trench Coat aka "Men in Black". With 96 post in this forum (didn't check out ur previous posts) one (actually only speaking for 'me') would assume you are smoking locoweed or on the payroll of Mayor Bloomberg.

LOL, had too google "ARGO" learn something new everyday. http://www.benelliusa.com/innovations/argo.php Thanks

Just curious, is this the barrel that is on the standard M4? Friggin 1/2 the price of a new M4. http://www.benelliusa.com/store/Barrels/Tactical-Barrels/M4-Barrel--w-choke-tube-p190.html

amen amen!