WrenchBender

I don't think anyone ever stated his listing was a scam. What I got out of it was the use of pictures, other than of the actual Benelli, would bring doubt to the validity of the listing. Sure wish I had the extra cash,.......I would pay the premium for the H20 model.

I pulled my trigger, crushed it, and installed a Timney 510

Using live ammo as a "tool" are always a very bad idea...... http://www.sniperforums.com/forum/off-topic/30942-50-cal-rounds-not-hammer-graphic.html

Very close yo my experience when mine was new.........get some wear on those springs and the action

My opinion, the Urbino is the best PG stock available.......love it!

That may be a quick install, but it looks like ****.

I agree,........one just needs a proper set of snap ring plyers. Very easy to change the parts, I highly recommend doing it yourself!

I do oil them, but I do wipe them before reassembly.

I sight in at 50m

wow.........

My mistake,.......I did miss the fact that you were using a Larue.

Hope that works for you, i tried the T1 with the stock fully collapsed. Was not able to get a good sight picture and a secure cheek weld

There is not one.....

I used the OEM mount from AimPoint,......height is perfect for me. Co-witness is great on the middle stock position.

My apologies,.........I was completely confused. I started with a FFT hammer and trigger. I replaced the hammer with a Geissele piece.

I believe that is backwards,.......the FFT wears very quickly. anyone know of the thread about the trigger wear?

Looks like a casting flaw. I had an FFT in my M4, swapped it out for a Geissele. I was not happy with the way the trigger was getting marred up from the action. The Geissele still looks good.

The carbon on the pistons is like the carbon on an AR bolt. The carbon build-up is self limiting. If you must clean them to "factory fresh" remove them and soak overnight in MotorCraft Carburetor Cleaner. Get it from the parts counter at your dealer, it is liquid, in a can not in aerosol form.

ArmsList is just a bad idea,.........three in ten listings are scams.

Nice pics,........ I think that finish wear is indeed from barrel removal/install. would have expected a few others' comments here by now..... Here's a thread from some years ago http://forums.benelliusa.com/showthread.php/16695-M4-receiver-wear-over-time

With the lighting and the grease/oil in place, it is a bit hard to tell.

I was told that any Benelli rail may fit. With that given information, you may be able to use a Benelli rail from a M2. Saw those listed on Brownells.

I'm selling my old Mossberg 835 and using a Vinci this year