-
Posts
868 -
Joined
-
Last visited
-
Days Won
36
Everything posted by M2_shootr
-
It’s very sad, because they really do have some innovative product in the marketplace.
-
Fab Defense has never been a pillar of quality.
-
I’ll get a pic tonight. I know it’s the MR1 5 Position Recoil Tube
-
So a while back, I was curious about upgrading the butt pad on my SN Tac’s collapsible stock body. After a bit of research, and using a spec sheet StrangerDanger sent me, I was able to confirm the 10403 pad would fit well. I ordered one and did the install. An easy process, getting the screws out of the Benelli pad was the hardest step. Like the M4, a relief hole must be drilled in the backing plate. Due to the angle of the Super Nova’s receiver extension tube, I drilled a 3/4” & a 1” hole as pictured. The factory Benelli pad has a slightly larger relief hole. I reused the Benelli screws from the factory butt pad. **I did notice one thing that I don’t care for. When fully collapsed, the receiver extension tube presses on the pad. I won’t shoot it with the stock fully collapsed, but some may. Just a point to be aware of. I have thought of acquiring a spare tube and cutting an inch off my factory tube. **Apologies for the poor pics, taken in my dungeon work shop in basement, very poor lighting. @StrangerDanger
-
Recommendation for red dot site for Benelli M4 H20
M2_shootr replied to MJSTEIN0753's topic in Benelli
I can confirm, ModLight is brighter and has a better beam throw, I have two. Both are PLHV2-18350 models. They are more expensive though, come with two rechargeable batteries and charger. I do have them on rifles at the moment. -
A tip for cleaning the pistons. Soak them in Motorcraft carburetor cleaner. The liquid, not the spray. The carbon is dissolved in a few hours, wipes clean with a paper towel.
-
it’s a piston driven gun, not sure how close it resembles ARGO Their stock choice may have been import driven.
-
The come with thread compound on the screws already.
-
The reply from ScalarWorks that I expected
-
That’s about it. the A&S housing is phenomenal, I have the FFT trigger parts as well as a Geissele hammer. Just have to get the time and patience to install the bits in the housing
-
My recently purchased mount came with the three sets
-
Yes, it can
-
That is an awesome plate.......I may need one as well
-
All my years of shooting the M16/AR has pushed me toward pistol grips. Except my 870, have a MagPul on it. Forgot about the Browning BPS, it’s has the “English stock” on it
-
I’m really not a fam of the field stocks, I prefer the collapsible But, something about the NP3 finish just makes your M4 pop with the field stock, love it!
-
And the collapsible stock received and even installed
-
GunBroker can be a nightmare. Many dishonest sellers there now and scammers are multiplying like rabbits.
-
Benelli Vinci pad
-
You’re fine....there are other opinions on what works best.
-
CLP I also suggest gunsocks a golden rod in the safe, and a meter monitor himidity
-
Forgot to add. The very first think I would try would be Kano Kroil. Spray it on, keep the barrel wet by placing paper towels over it and wetting them. Let this sit overnight. Then use a toothbrush to remove corrosion. If this doesn’t work, replace the toothbrush with STAINLESS steel wool. I would not use steel wool as the carbon steel pits can get lodged and they rust easily, creating an even bigger issue.
-
Look like the onset of rust/pits. Heat, humidity and ocean air, bad combination. Weapons should be oiled quarterly at a minimum. When I lived in Miami I did that. Guns in silicone impregnated gunsocks, safe has a large GoldenRod, and all wiped and lightly oiled quarterly.