M2_shootr
-
Posts
869 -
Joined
-
Last visited
-
Days Won
36
Everything posted by M2_shootr
-
Good-Fast-Cheap......pick any two, but you won’t have the third.
-
Six weeks........thats rather normal
-
The IWC bodies sure do make a difference -
I believe there are some internals available now. Gotta dig into this a bit more
-
I guess the carrier was the part I was leaving out Seems that does make 13.
-
Did they name the parts? Have anything on paper from them?
-
Guess you are correct. The SuperNova has a 922 parts count of 12. Two parts must be replaced with US manufactured ones to deviate from the imported configuration and 5 shell capacity. Can anyone verify the SuperNova parts count ? Replace the factory stock & follower with US manufactured parts & you are good to go.
-
I don’t believe 922 pertains to pump models......had to deal with the sporting definition
-
I’ve seen these 1st hand at a shop in STL. Personally, I have no use for this rail. It provides nothing that I don’t get from the factory hand guards. I would even want/have to add covers to the MLOK rail. A light would be farther back than other options, creating even more shadow. I don’t run a vertical grip on a full size shotgun. I simply see no benefit other than a lighter wallet.
-
As long as you don’t want the ability to remove it, theepoxy is a great idea
-
Just for giggles, I removed the GG&G clamp that was on my SuperNova. It did change the POI from how it was previously sighted in.
-
You will be fine at that location. Do pull the pad as suggested above, just to be sure. Also, ensure you predrill the stock before installing the sling stud. I usually also coat the threads with a few drops of boiled linseed oil. Helps the threads cut easier and seals the wood from moisture.
-
https://www.botach.com/benelli-80201-nova-supernova-3-shot-magazine-extension-kit/ https://www.lapolicegear.com/benelli-80201-novasnova-3shotmag-extkit.html
-
There is that,.....hadn’t ever thought about that.
-
Didn’t know there was any down sides. My main reason for one would be to pickup a QD socket....the GG&G doesn’t have one though
-
Urbino stock with cheek riser and shell carrier, both from MesaTactical https://mesatactical.com/products/page/2/?s=SuperNova&s_cs=1 Nordic magazine extension https://www.cheaperthandirt.com/product/gg-and-g-extended-magazine-tube-benelli-nova-supernova-813157005626.do?sortby=ourPicks&refType=&from=fn&ecList=7&ecCategory=118113 GG&G barrel clamp https://www.gggaz.com/shotgun-barrel-clamp.html
-
Don’t think I’ve ever seen anything that would allow for that on a M4
-
You looking for a manufacture date?
-
Like for a light or something?
-
Mesa Tactical makes a picatinny rail with a saddle shell holder. RMR low picatinny rail mount might work. I’d suggest the Scalarworks mount and use the Velcro card shell holders
-
I sight mine at 24 m with slugs
-
Deep Penetrator
-
Run 100 slugs through it. Clean it and go from there. They need a bit of a break in...
-
Benelli M4 with upgrades excellent condition. It’s a collapsible stock model, has a Freedom Fighter Tactical (FFT) full length magazine tube, FFT follower, FFT handguards, FFT trigger, hammer & sear kit. Additionally it has an AVA light mount, IWC rear sling QD socket and the Limbkiller buttpad upgrade. All the factory parts also included. I love the Benelli, bit I am chasing a unicorn and want to get an H2O. $1650 shipped within ConUS. SOLD PENDING FUNDS
-
I always have a screw driver in the range bag, don’t always have a cleaning rod segment. But either would work better than the factory bit