GTTom Posted September 27, 2020 Share Posted September 27, 2020 I'm thinking of getting the Briley One shot extension. Since I have the Carlson Breaching choke I think there will be enough length on the barrel but Briley's web site doesn't give any specs on how long the One shot extension is. Anyone have one that they can measure for me? Thanks ! Quote Link to comment Share on other sites More sharing options...
Vertigofirearms Posted September 27, 2020 Share Posted September 27, 2020 Won't work. You need the factory or nordic components. Quote Link to comment Share on other sites More sharing options...
aznwhip Posted September 27, 2020 Share Posted September 27, 2020 It's too beefy. I tried it with my OEM brake and wouldn't clear. Anything short of same diameter as the barrel will result it clearance issue. Quote Link to comment Share on other sites More sharing options...
GTTom Posted September 27, 2020 Author Share Posted September 27, 2020 Great, thank you guys. Good thing I checked? Quote Link to comment Share on other sites More sharing options...
Sigma05 Posted September 29, 2020 Share Posted September 29, 2020 I run the Nordic +1 in conjunction to the factory choke/brake. With that combo there’s plenty of room to spare. 2 Quote Link to comment Share on other sites More sharing options...
GTTom Posted October 2, 2020 Author Share Posted October 2, 2020 (edited) I already have the choke so not inclined to change it out. I'm still curious so I sent an email to Briley to see if they would provide the dimensions on their One Shot extension. Edited October 2, 2020 by GTTom Quote Link to comment Share on other sites More sharing options...
GTTom Posted October 17, 2020 Author Share Posted October 17, 2020 (edited) Follow up on this thread: I contacted Briley tech service and they sent me a CAD drawing of the One Shot with measurements. It was a 1:1 sketch so I printed it, cut it out and using it as a template it looked like it would fit. Ordered the One Shot extension and it came in last week. it FITS! For clearance I have to install the One Shot extension first then screw in the Carlson choke. Just enough clearance doing it this way. Now that it it fits I had to address the issue of not getting the last round in the magazine. Thanks to the info from @Birdog19 post in this thread I was able to shorten the magazine spring without a lot of trial and error. Shortened the spring to 16" sticking out of the magazine and it fit 8 rounds but it felt like the last round was binding the spring just a bit. Cut the spring back to 15" and it leaves some clearance after the last round. Good to Go! I'll hit the range tomorrow and runs dome rounds through it. Pretty happy with the outcome though. Edited October 17, 2020 by GTTom 1 2 Quote Link to comment Share on other sites More sharing options...
BigJoe365 Posted October 20, 2020 Share Posted October 20, 2020 I bought one, waiting on my CC tube Quote Link to comment Share on other sites More sharing options...
GTTom Posted October 20, 2020 Author Share Posted October 20, 2020 (edited) Went to the range yesterday. Everything worked great. No problem loading 8 rounds. Not FTF. Ghost loaded 10 rounds. Boy was that fun? Action shot of my buddy who emigrated from Scotland. He sent the photo to his friends in Europe titled" Sunday morning Merica!". You can see the flash pattern from the breacher choke. Edited October 20, 2020 by GTTom 2 1 Quote Link to comment Share on other sites More sharing options...
Butters149 Posted January 1, 2021 Share Posted January 1, 2021 On 10/17/2020 at 1:57 PM, GTTom said: Follow up on this thread: I contacted Briley tech service and they sent me a CAD drawing of the One Shot with measurements. It was a 1:1 sketch so I printed it, cut it out and using it as a template it looked like it would fit. Ordered the One Shot extension and it came in last week. it FITS! For clearance I have to install the One Shot extension first then screw in the Carlson choke. Just enough clearance doing it this way. Now that it it fits I had to address the issue of not getting the last round in the magazine. Thanks to the info from @Birdog19 post in this thread I was able to shorten the magazine spring without a lot of trial and error. Shortened the spring to 16" sticking out of the magazine and it fit 8 rounds but it felt like the last round was binding the spring just a bit. Cut the spring back to 15" and it leaves some clearance after the last round. Good to Go! I'll hit the range tomorrow and runs dome rounds through it. Pretty happy with the outcome though. quick question, once you twist the extension off, does the spring come out or is there a c clip in place? Quote Link to comment Share on other sites More sharing options...
gm2376 Posted January 1, 2021 Share Posted January 1, 2021 2 hours ago, Butters149 said: quick question, once you twist the extension off, does the spring come out or is there a c clip in place? There is no c clip when running a extension. Quote Link to comment Share on other sites More sharing options...
GTTom Posted January 1, 2021 Author Share Posted January 1, 2021 14 hours ago, Butters149 said: quick question, once you twist the extension off, does the spring come out or is there a c clip in place? As gm2376 mentioned , there is no C clip used with extension. Since the spring isn't captured by a clip it can take a little practice to remove the extension without the spring flying out. There is a small hole in the end of the extension. I stick a small screwdriver in the hole which helps to capture the spring in the extension while you screw it off. 1 Quote Link to comment Share on other sites More sharing options...
Suplize Posted December 21, 2021 Share Posted December 21, 2021 (edited) On 9/29/2020 at 11:24 AM, Sigma05 said: I run the Nordic +1 in conjunction to the factory choke/brake. With that combo there’s plenty of room to spare. What is the end cap on the magazine? I apologize if you already mentioned it. I see you mentioned the Nordic +1 but I can’t seem to find it. Edited December 21, 2021 by Suplize Quote Link to comment Share on other sites More sharing options...
Dkay67 Posted December 21, 2021 Share Posted December 21, 2021 Looks horrible with that Carlson breaching choke, imo. Too cramped, aesthetically. The textures are all over the place too. The Nordic is the way to go 2 Quote Link to comment Share on other sites More sharing options...
Lakotah Posted March 21, 2023 Share Posted March 21, 2023 I know it’s been awhile on this post but does anybody know the overall length of the extension? Quote Link to comment Share on other sites More sharing options...
Djack69 Posted April 21, 2023 Share Posted April 21, 2023 Any feedback on yhise carbon fiber tubes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.