Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by RPC

  1. Yes, $50 even out of pocket. Sent you my email address via PM if you decide you want them. -Rex
  2. Any takers at $50 TYD? Tired of looking at these taking space on my desk, will drop the price ‘til they go, even if I have to pay someone to take ‘em...
  3. Interested, PM incoming.
  4. Ordered, little to lose. I also like that the end which engages the bolt assembly is an uninterrupted “lip”, not a three-lobe design as in other aftermarket designs.
  5. Unless OP lives in California that is...
  6. Hey Mil. I looked all over the packaging, included literature and sights themselves and can’t find any date of manufacture. If you or anyone else knows where I should be looking I’ll give it another try. The warranty card says the sights are warranted for 12 years from sale date and the tritium is warranted for 5 years from sale date. Best I might be able to do is provide the sale date: 9/28/2019 I’m happy to provide a printed copy of the invoice to the buyer in the event of a warrantee need. Appreciate the question, something any prospective buyer should be intere
  7. Installed the set, took a single range trip to try them out, just not my cup of tea. I’ll include a Craftsman 5.5mm wrench for the front sight nut (rear sight requires only a flathead screwdriver). $57 shipped, save yourself 40 bucks if you’ve been looking for an interim option between stock sights and an optic. -Rex
  8. Evo/SD- You guys are awesome. Your knowledge and wisdom continue to disproportionally contribute to this collective info base. Personally, your contributions to my issue are much appreciated. I've been eyeing a move to a field stock anyway, maybe I can find someone interested in a straight trade. The aesthetics of the CA-compliant c-stock are admittedly attractive, but I favor function over form. Thanks again to you both. This thread has single-handedly saved me $350+ in orders I would have placed tonight, not to mention the weapon confiscation or worse I faced by undoubtedly
  9. Well I’ll be a sonofa... So this leads me to two follow-up questions: 1) If I wanted to go down this rabbit hole, is there a permit, exemption or stamp I could apply for that would allow me to modify my M4 to a collapsible stock config. and remain legal? 2) Aside from Q#1, I guess I would have been better off purchasing a model with the field stock then? *Huge thanks to Evolution on this blindspot of mine, could have been all kinds of trouble for me.
  10. Interesting. I was under the impression that as long as I was 922r compliant, it was OK to enable the collapsible stock. Am I mistaken?
  11. Good eye, SD! I was looking back through the pics, saw the exact same thing and wondered what it was, so I took the cheek piece off and low and behold, a screw I absolutely did not expect to find- see first pic. Strangely, where the cheek piece hardware required a metric hex wrench as expected (2mm), the screw underneath was SAE, or at least my own 5/64” hex wrench fit it perfectly to remove. Once removed, the unlock button worked exactly as explained it should and I was able to remove the stock for the first time in close to a year of ownership. Many thanks!
  12. Sorry SD, I didn’t answer your question above: I live in CA and purchased the M4 new here in CA. To my stock, the unlock button is free to depress ~1/16” but is a hard stop beyond that. I can wiggle the stock maybe 1/8” left to right and it has zero in/out play. Some photos of the stock below, curious if it’s that pin under the cheek weld that’s the culprit... For anyone who has seen multiple of these c-stocks, does anything stand out about mine? Anything new to mine that’s unusual? I’d have to pull the box out of storage to find the manufacturing date but I bought it ne
  13. Yes, specifically how to remove the stock from a non-notched/CA-compliant recoil tube (unsure if the operation is different for a botched tube vs. an un-notched tube). I’ve tried everything I can think of to remove the stock but the unlock button on mine only depresses ~1/16”, seemingly not enough to release anything inside. I initially thought Benelli had somehow pinned the button to make it inoperable for the CA market but I don’t see any evidence of that. Again, the button doesn’t depress, much less am I able to rotate or push/pull the stock at all. I’ll try again when I get home
  14. Thanks SD, I’ve read and re-read your install thread readying my testicular fortitude for the job... Appreciate the confirmation of just a recoil tube needed. I thought that was the case, occurred to me I should get positive confirmation before buying parts. Last question: How does one remove the un-notched tube from from the c-stock?
  15. I think the last mod I want to do to my M4 for now is enable the collapsible stock. I purchased mine new LY in CA and it came with the “collapsible” stock but a un-notched recoil tube. Does the C-Stock on my M4 just need a four position recoil tube to enable the collapsible functionality, or is this thing purely for looks and I have to replace both the stock and recoil tube? -Rex
  16. RPC

    Wtb Ava mount

    I can’t believe my eyes... Good get!!
  17. You 100% nailed it. The quoted round count for the weapon I bought was “~200”, and it looks it, so I really wasn’t thinking about replacing anything initially. But boy when I loaded each mag for the first time one was 2x as hard to load than the other one. I stripped each down thinking maybe I’d find an aftermarket spring in one but nope, they were both factory but someone had just stretched a couple of the coils in one of them. After that the designed spring rate will be forever compromised. Not knowing what kind of other amateur gunsmithing had been carried out, I placed the order for
  18. Seconded. I’ve got tens of Glock mags, some that have been loaded for 10-15 years (having been shot in between but they stay loaded in wait), and I’ve only ever had to replace mag springs when I start to get FtF, and it’s always on the most used mags, not necessarily the oldest. That said, I just purchased a nearly new Glock from a private party and ordered new springs throughout, including mag springs, because their cycle count & general life before me is unknown.
  19. Good copy, something for me to keep an eye out for throughout the life of my own M4. Appreciate it.
  20. Interesting. Seems to be the exception rather than the rule based on responses above. Out of curiosity, what symptoms does one experience which leads to replacement of the carrier latch?
  21. Appreciate it, SD.
  22. I recently switched the HD ammo in my M4 from 00 buck to 04 buck. Even though they’re both 2 3/4 Federal Premium, the 04 buck shells are apparently just enough shorter that I can now fit 7 shells in my ti CC mag tube whereas of the 00 buck I could only fit 6 in the mag. While the 7th round of 04 buck does clear the shell stop, its just barely and I can only shove it further into the mag tube by 1/8”-1/4” and releasing the stack of shells back onto the shell stop seems to put quite a bit of pressure on it. Am I at risk of doing any damage to the shell stop by leaving it so t
  23. I think this is the most impressive zombie thread I’ve ever encountered.
  24. RPC

    Wtb Ava mount

    Good luck with this.
  • Create New...