Jump to content

HOGWILD

Members
  • Posts

    1348
  • Joined

  • Last visited

Everything posted by HOGWILD

  1. The older 870 Wingmasters were a quality shotgun but all this new stuff can't hold a candle to the older Wingmasters! Would never buy a new shotgun from Remington due to quality and craftmanship issues!
  2. Will it cycle any kinda ammo with out malfunctions? Do you have an owners manual? Is it a SBEII or a SBE? What is the specs on the ammo you are having issues with? Manufacturer & load info would help?
  3. http://www.tomknapp.net/store/product.php?productid=347&cat=8&page=1
  4. Aftermarket is only way you can go! The ATF back in 2004 stopped Benelli from importing them due to 922R violation. Most all of the Benelli items are imported and not too many people carried these Benelli items to start with. I was lucky enough to get one of the last few my Benelli Dealer had and cost me 65.00. They are upwards of 250.00 dollars now and IMPOSSIBLE almost to find anymore. http://www.benelliusa.com/forum/showpost.php?p=128411&postcount=5
  5. HOGWILD

    sbe10/pic

    Nope i spend my extra cash on Fishing junk and Rifle Ammio, My Shotgun colection is limited to a SBEII, Browning Citori Satin Lightning and and 2 H&R Single Barrels one a model 48 Topper and the other a newer Topper Classic Deluxe,and they are all 12ga shotguns!
  6. HOGWILD

    sbe10/pic

    Them things look neat and i would not mind trying one myself, did not take me long to git rid of that small dull red thing on my SBEII that looks just like whatever shotgun you have in that picture? What has been done to that thing? Looks UNIQUE!
  7. HOGWILD

    sbe10/pic

    When ya going to upgrade that usless front sight?
  8. I agree it will shoot 1 Oz loads but it has to be properly broken in for spring memorization for it to cycle the loads that Benelli says that it will not cycle? Just poor choice for a range gun IMHO:) I would not use the SBEII for clays and i have tried and it shot fine with the 1 oz and never tried the 7/8 oz loads but that gave me the option to get my Citori Satin lightning which shoots anything you want to feed it with no issues plus easier to load than a semi for clays & trap! My range will only allow 1 shell to be loaded unless you are shooting doubles so a semi is a waste of time on my range! All you are asking for is issues and complaints using a SBEII with 7/8 oz loads!
  9. Wrong shotgun for what you have in mind, get a range gun, O/U and enjoy shooting clays. The SBEII is not going to cycle that round and Benelli says 1 1/8 ounce is minimum so where the 1 oz came from is wrong info! The SBEII is a meat machine not a dirt machine! http://www.benelliusa.com/assets/manuals/Benelli_Super_Black_Eagle_II_manual.pdf I strongly suggest reading manual before spending $1400-$1600 for a shotgun?
  10. I think Benelli CS could probably not answer that question:)
  11. I guess someone read my second link in my post Tim:p
  12. For some reason i find it hard to imagine you have not visited the shotgun forum becasue all your issues mentioned with complaints were in the shotgun forums? I would stick with the bolts as i have also done!
  13. The code is located on the side of the reciever as shown in link inside the box! http://www.benelliusa.com/forum/showpost.php?p=127628&postcount=17
  14. Little more info would help someone find the bore diameter? 12? 20? What Gauge is your shotgun? http://en.wikipedia.org/wiki/Gauge_(bore_diameter)
  15. that depends on your LOP and putting the shotgun but pad in the inside of your elbow and then reaching up and try to put your finger on the trigger as you would normaly do when you shoot will tell you if it's short or long? So simple to do this and get it rite?
  16. If your LOP can't be fixed by using one of the other 2 length of pads you are looking at belt sanding your stock and would get a smith that knows how to fit YOU to your stock and let him adjust it which should not brake the bank for this adjustment! So which of the 3 different LOP pads does your shotgun come stock with? http://www.benelliusa.com/parts_and_accessories/recoil_pads.php
  17. http://www.gunnersden.com/index.htm.shotgun-stock-fitting.html This breaks it down a little and hope it clears things up? Sometimes going to a gunsmith is only way to get it spot on for a personal fit! http://thegunwiki.com/Gunwiki/ProcMeasureBarrelLength
  18. Midwayusa has a good price on their logoed case?
  19. how well does it pattern?
  20. I have the Bird buster on front of my SBEII and would throw away the original really fast!! I could not see it at all as it was too dark but the florescent green/red of the hi viz picks up way more light and it helps me since i am optically challenged and no i do not need a day job! http://www.hivizsights.com/Shotgun-BirdBuster-Magnetic-Sight-P86C1.aspx
  21. Call CS and show them your issues if you want them fixed? It does look like something went wrong and probably should have not been sold in that condition. But on the other hand tear down a Ruger Mini 14 and see what the barrel looks like next to the gas ports on a brand new rifle. I would be ashamed to show it and from what i have been told by owners that have had them for 20 to 25 years is that this is normal. What i am talking about is much worse than what you have pictured! It does nothing to affect the operation of the rifle and is hidden and looks like grinding was done on barrel but it does not rust and is outta site so i am ok with my issue but totally understand you have a finish problem that needs to be talked about with CS. Good Luck!
  22. You could see if the magnetic stick on Hi-viz sights will line up even with your front bead and if they do they only cost about 20.00 bucks! Not sure if this firearm barrel has a vented rib but it will have to have one for this type of application in which i have on several shotguns and they work fine and do not come off!
  23. http://www.benelliusa.com/forum/search.php?searchid=1294762 It should be easy to change and you can probably find something above?
  24. This would be a fine place to get some great info as this search has done, mudhen has probably patterned more chokes and loads than everyone put together! He also has some great turkey porn every year:p http://www.benelliusa.com/forum/search.php?searchid=1294697
  25. Did Benelli suggest you replace these parts? Also what type of lubrication you using on the inside parts of the gun? I would suggest giving CS a call and ask them who had the parts as the whole gun is imported and that keeps a bunch of folks from having parts available! Whole bunch of worthless lubrication on the market and does it malfunction with all shells all sizes or certain ones? BTW WOOOOOOOOOOOOOOPIGSOOOOOOOOOOOOOOOOIE:p
×
×
  • Create New...