12508

Anyone with the slightest interest in firearms or cars needs to see jw2 asap.

Just ignore the tacticool crowd and get the KZ ergonomic version. I abused one in a shotgun class doing various drills over and over again with no ill effects to it or the M4. https://www.botach.com/kley-zion-benelli-m4-ergonomic-3x-oversized-charging-handle/

The ad says 30 were made. Elsewhere I have read 60 (maybe even on here)? Anyone know the real total? I was able to get my hands on two of them. I sold one off. Interestingly enough, one (the one I still kept) lacked coating on the trigger guard. I realize the 11711 is now a regular item for LE.

I have found that every Benelli/M4 I have fired/owned loves Wolf slugs. One ragged hole at 50 if you do your job.

Give us the M4 SBE Benelli!

I found this part most interesting:

I have found a bore snake can help. I havent been that impressed by the tornado brushes. A baby bottle brush/cleaner works well to clean out the breech end of the barrel where most of the slug fouling is and can be found at any grocery store

I have the sidearmor. Looks like they are now going by the name asgard so yeah . . .

Anyone consider this one? http://www.gggaz.com/universal-quick-detach-sling-attachment.html

Yes, I was once told the minimum order you can place with Benelli is $10K in stock. That was a few years ago. Might be more now.

I have seen them in my area for the past couple of months. The cerakote seemed to be light and clashes with the black furniture imho.

Just take one of the phillips and go to lowes or home depot and see if you can find a hex replacement on the fastener aisle. Most have a fixture to thread your existing fastener into to find the pitch. Might be worth a try.

I have two sets I bought at the same time from Botach about 4 years ago. One set is hex, one is phillips. The H2O has hex.

I had the geissele and hated it. The trigger pull on my gun became heavy. No biggie, I just returned it. I use the FFT now. http://www.brownells.com/shotgun-parts/trigger-group-parts/hammer-parts/hammers/benelli-m4-hammer-prod44723.aspx

Can you fire rifled slugs through it?

FP-10 or the oil the gun comes with.

Had a geissele and hated the extra heavy pull it created. I installed the FFT and the pull is much better. Not quite factory though. I am watching the wear. I hope I gets to a point and then stops.

I have noticed some shells are tighter than others. i dont think plastic hulls will break in the aluminum carriers but the shells get easier to remove or insert after several tries. So either the metal gets smoother or the shell gets worn down a little?

The Sidearmor is a quality piece. The only downsides (small) are that it can add weight when loaded up with 8 shells, the pic rail is kinda sharp, and it takes practice sliding it on under stress. [ATTACH=CONFIG]2733[/ATTACH][ATTACH=CONFIG]2734[/ATTACH]

Yeah even benelli's website says you can get them with that stock now.

How old/new is your M4? S/n range?

Still no website eh? I would be interested in more info on just what their trigger job entails (tuned factory or aftermarket parts?). The loading port polishing and carrier latch mods intrigues also. . .

Bolt, barrel, inside of receiver, pistons and cylinders.

Just get a refund and get a KZ unit imho

What I don't get is that Benelli has to be keeping an eye on this forum and they have to know what these things are going for. You'd think they'd find a new work around.